Programmateurs   •   Solution de mise en bande   •   Bande alvéolée

FlashRunner II (FR02)

Manufacturer specific In-system programmers

Overview

 

FlashRunner II series is a range of high-performance, standalone In-System Programmers specific for Flash-based microcontrollers and serial memories. FlashRunner II series is targeted at production environments and can work either in full standalone mode or controlled by a host system.

  • Fastest programming algorithms (as fast as target device's memory technology limit), approved by silicon manufacturers;
  • Easy ATE integration;
  • Standalone operations (projects and code images stored on a memory card);
  • Also controllable by any host system via RS-232 or Ethernet;
  • Flexible, fully configurable;
  • Compact and robust design for production environments;
  • Data integrity guaranteed (every data transfer to/from the host system or Secure Digital card is CRC tagged).

The FlashRunner II series includes all of the programming algorithms that have been developed for a silicon manufacturer of your choice

Hardware Features

 

FlashRunner features state-of-the-art electronics to provide you with high integration flexibility in a compact footprint.

  • 9 to 24V DC power supply input;
  • Five digital I/O lines;
  • Two digital I/O or analog output lines;
  • Two programmable output voltages (0 to 15V, 0.25A and 0 to 5V, 0.5A);
  • One analog input line;
  • One programmable clock output;
  • Secure Digital memory card (up to 2 GB);
  • 512 bytes on-board dynamic memory;
  • On-board timekeeper and calendar;
  • I/O protection;
  • Optoisolated inputs for project selection;
  • Two optoisolated command inputs (START and STOP);
  • Three optoisolated status outputs (FAIL, PASS, BUSY);
  • Optoisolated RS-232/Ethernet channel.

FlashRunner's open architecture makes its firmware easily upgradable to support both new devices and new features.

Software Features

 

FlashRunner is set up and controlled via ASCII-based commands. FlashRunner can receive and execute commands in two ways:

  • Over the RS-232 or Ethernet connection (Host mode);
  • Via "scripts" stored in its SD card (Standalone mode).

In the first case, FlashRunner is controlled by a host system (e.g. Windows HyperTerminal); in the latter case, FlashRunner works in standalone mode and is fully autonomous.

  • Fully autonomous standalone mode thanks to its SD memory card (FAT16);
  • Controllable by any host system through a terminal utility and simple ASCII protocol;
  • Unlimited projects (scripts);
  • Log files;
  • Erase, blank check, program, read, verify, oscillator trimming, etc.

FlashRunner comes with a Windows utility that allows you to communicate with the instrument and perform the most common operations: send commands, manage SD card files, update the instrument's firmware, etc.

Available Models

The FlashRunner II series includes the following models:

FR02ATM0 Supports Atmel devices
FR02CYP0 Supports Cypress devices
FR02ELM0 Supports ELMOS devices
FR02FJT0 Supports Fujitsu devices
FR02FSL0 Supports Freescale devices
FR02INF0 Supports Infineon devices
FR02MCP0 Supports Microchip devices
FR02MEM0 Supports serial memories
FR02NXP0 Supports NXP devices
FR02REN0 Supports Renesas devices
FR02SLL0 Supports Silicon Labs devices
FR02STM0 Supports STMicroelectronics devices
FR02TXI0 Supports Texas Instruments devices
Lu 7031 fois Dernière modification le mardi, 15 janvier 2013 15:08

Share This