Motor de programación de ocho emplazamientos: conectividad de reserva, RS232 y LAN
Designed to work inside the Test-Fixture the FlashRunner FR01M01 provides a solution for multi-board panel or multi-device board programming, the built in ISP line multiplexer means that up to 8 devices can be programmed sequentially. The FlashRunner FR01M01 piggybacks to your programming system through three header connectors.
FlashRunner features state-of-the-art electronics to provide you with high integration flexibility in a compact footprint.
- 9 to 24V DC power supply input (110/220V AC for the FR01PRO model);
- Five digital I/O lines;
- Two digital I/O or analog output lines;
- Two programmable output voltages (0 to 15V, 0.25A and 0 to 5V, 0.5A);
- One analog input line;
- One programmable clock output;
- Secure Digital memory card (up to 2 GB);
- 512 bytes on-board dynamic memory;
- On-board timekeeper and calendar;
- I/O protection;
- Optoisolated inputs for project selection;
- Two optoisolated command inputs (START and STOP);
- Three optoisolated status outputs (FAIL, PASS, BUSY);
- Optoisolated RS-232/Ethernet channel.
FlashRunner's open architecture makes its firmware easily upgradable to support both new devices and new features.
FlashRunner is set up and controlled via ASCII-based commands. FlashRunner can receive and execute commands in two ways:
- Over the RS-232 or Ethernet connection (Host mode);
- Via "scripts" stored in its SD card (Standalone mode).
In the first case, FlashRunner is controlled by a host system (e.g. Windows HyperTerminal); in the latter case, FlashRunner works in standalone mode and is fully autonomous.
- Fully autonomous standalone mode thanks to its SD memory card (FAT16);
- Controllable by any host system through a terminal utility and simple ASCII protocol;
- Unlimited projects (scripts);
- Log files;
- Erase, blank check, program, read, verify, oscillator trimming, etc.
FlashRunner comes with a Windows utility that allows you to communicate with the instrument and perform the most common operations: send commands, manage SD card files, update the instrument's firmware, etc.